Table of Contents

7th International S&R Forum in Silverstone

Wednesday, 20th May 2015
Time Lesson Speaker
09:ooh Conference opening and moderation Rupert Cambray, JRL
Dr. Hans-Jürgen Daams, ZINS
Session 1:. S&R Prevention
09:15h Prevention using contact point analysis Dr. Hans-Jürgen Daams, ZINS
09:45h Preventive Actions and corresponding Tools to reduce the risk of Squeak and Rattle Dr. Hans Hermann, Timm Kiener, Berner & Mattner Systemtechnik
10:30h – 10:45 Using Altair‘s S&R Director to predict the risks of S&R in Interior Assemblies Ismail Benhayoun, Altair Engineering
10:45h - 11.3oh Coffee Break | Networking
11:30h Virtual Detection of Rattle due to  Relative Displacement in a Vehicle Torgny Ljunberg, Volvo
Testing and Simulation Relative Displacement in a Closure Gap Jens Weber, Volvo
12: 15h – 13:3oh Lunch | Networking
Session 2:  Material Compability
13:3oh How to measure, prevent and eliminate Stick-Slip and Noise Generation Jan Zuleeg, Klüber Lubrication
14:ooh The Erma Tester to solve problems which latch and stickers Lutz Grosser, Firma Brose
14:3oh Noise prevention Chiaki Okabe, Marubeni
Alexander Holt, Marubeni
15:00h – 16:00h Coffee Break | Networking
16:00h Anti-Friction Coatings, a preventive solution to eliminate noise utility Vittorio Clerici, Dow Corning
16:30h Lifetime simulation of material comptiality Patrick Schimmelbauer, ZINS
17:00h  Stick Slip on textiles Dr. Martin Strangfeld, FILK gGmbH
Carina Petzold, FILK gGMBH
17:15h Summery |Discussion Rupert Cambray, JRL

Dr. Hans-Jürgen Daams, ZINS

17:30h End of the first conference day
19:30h Dinner
Thursday, 21th May 2015
Time Lesson Speaker
9:ooh Conference Opening Day 2 and Moderation Rupert Cambray, JLR
Jens Herting, ZINS
Session 2: Material Compability
9:15h            Applying Anti Friction Coatings by robots in serial production  Boris Schneidhuber, AKE-technologies
Session 3: S&R Testing
09:3oh S&R quality control at the end of line David Silk, Rolls-Royce Motor Cars
10:00h High-Power Shaker for full vehicle and component excitation Michael Schurm, AKE-technologies
10:3oh -11:15 Coffee Break, Networking
11:15h - 11:45h Frictional noise of seats and windows Dr. Rajesh Bhangale, Mahindra & Mahindra
11.45h In-Line test stands for functional noise Guido Wendel, ZINS
12:15h Acoustic Fingerprint Hyundai Motor Group & SM Instruments
12:45h – 14:ooh Lunch, Networking, Exhibition
Session 4: After Sales Service
14:ooh Low cost exciters for field service Michele Belotti, Belotti Sistemi
14:30h Closing Remarks Jens Herting, ZINS
WORKSHOP
14:45h – 16:00h Stick Slip on textiles Dr. Martin Strangfeld, FILK
Carina Petzold, FILK